Ignotix — Hardwood Floor Studio

Lay out a solid or engineered hardwood floor, get a carton-based take-off, fasteners/adhesive/underlayment by install method, and a cost estimate. The board-by-board cut list is the Pro add-on. Product-specific coverage and installation assumptions remain user-editable planning inputs.

01 Room

Width

Length

Deductions (sq ft)

Joists run

Boards install perpendicular to joists by default. Enter feet/inches like 12' 6".

02 Product

Construction

Thickness

Nominal width (in)

T&G overlap loss (in)

Coverage width (in)

Edge

Factory

Sheen

Take-off uses coverage width (nominal − T&G overlap), not nominal.

03 Layout

Pattern

Drawing / run angle (°)

Area/carton take-off is angle-independent. Exact board counts are shown only for axis-aligned straight layouts.

End stagger min (in)

Expansion gap (in)

Board length (in)

Gap default ½" — sits under most baseboard + shoe. Mfrs often spec ¾"; verify against your trim reveal. No H-joints; 3-course stagger step.

04 Install method

Fastener spacing (in o.c.)

Rosin/felt coverage (sf/roll)

Cleats/staples 6–8" o.c. + 2–3" from ends — verify to NWFA / mfr.

05 SKU & pricing

Coverage per carton (sf)

Flooring is sold by the carton — order rounds up to whole cartons.

Layout Board face T&G / seam Expansion gap

06 Take-off & estimate

★

Board-by-board cut list is a Pro feature.

Straight-layout planning schedule only. Pattern-specific cuts and off-cut optimization are not claimed until a dedicated solver is available.

Ignotix — Hardwood Floor Studio production reference workspace. Product dimensions, carton coverage, substrate preparation, moisture limits and installation consumables must be verified against the selected manufacturer's instructions and field conditions.