Reference layout workspace. Establishes the zonal data model for casework. Dimensions, part locations, hardware locations and production details remain reference outputs pending validated production handoff and field verification.
00v Voice Control Idle
Transcript appears here as you speak.
Parsed Intents livereference plan
No commands yet.
Opened from file. Chrome will re-ask for mic permission each session. For one-prompt continuous listening, serve from a local server: cd to the file's folder, run python -m http.server, then visit http://localhost:8000.
Example commands
bounding width 96 height 96 crown 3 · toe kick 4 · 3 columns bay 1 top three shelves middle four shelves bottom no shelves bay 2 top 6 shelves middle TV bottom fixed commit (or click the gold button)
00 CNC Readout drag the gold handles
W
—
H
—
Width & height update in real time. Drag any interior line to see those values here too.
01 Overall
Cabinet body only — fillers add to each side.
Drag the top edge of the elevation, or type a value here.
Setback of toe face from cabinet front.
Drag the gold tab on its inner edge.
Drag the gold tab on its inner edge.
Reference carcass and partition thickness.
Nested separately from 3/4" casework.
Door / drawer-front visualization and takeoff.
Physical thickness of stiles and rails in canonical fabrication handoff / 3D.
Door fronts wider than this split into a balanced pair using the bay reveal.
Physical face-frame rail between inset drawer fronts. Overlay banks do not use it.
Visual/fabrication reference setback from the face-frame plane.
Quick presets, drag the gold tab on the crown line, or type any value. Column count is set per-zone in the Bays panel.
01b Hardware — Handle Placement doors & drawers
On Stile/Rail: handle centers on the bay frame (inset = ½ inter-stile, vertical = ½ rail) and tracks as you change them. Manual: use the values below.
Leading edge to a L/R handle.
Top/bottom edge to handle, when not centered.
Hole spacing of a centered drawer pull.
Two-hole door pull spacing. 0 = single knob.
Drilled mounting-hole radius for knobs & pulls. Adjust by decimal (e.g. 0.125, 0.1875, 0.25).
These are the project defaults. Each door/drawer can override side, vertical, and hole spacing in its click-to-edit popover.
02 Zones listed top → bottom (matches elevation)
Each zone has its own height and depth. Typical pattern: Base (30" h × 24" d) → Middle (open shelves or TV, ~30" × 14") → Upper (open shelves, ~36" × 12"). Vertical column lines run through all zones.
03 Bays one row per zone · click +/− to add or remove columns in that row
Cabinet-domain types door, drawer + open-shelving types shelves, fixed, tv. This is the vocabulary App C will consume.
04 Elevation
DRAG TO ORBIT · WHEEL TO ZOOM · DOUBLE-CLICK TO RESET
Interior Feature
X—
Y—
Manipulating interior feature
Zone
Columns
3
Add or remove columns in this zone only.
Bay
Distance from the chosen Left/Right edge to the hole (you pick the side; this is the quantity). Blank = project default. Ignored when Center.
Two-hole pull only. Horizontal for a pull on a top/bottom rail; vertical for one on a side stile.
Handle centers on the stile/rail you set (inset = ½ stile, vertical = ½ rail).
